NO RESERVE Leather FOG LIGHTS Keyless Entry FRESH TIRES Nerf Bars BEDLINER Clean

2004 Dodge Ram 2500 SLT Description

2004 DODGE RAM 2500 SLT

NO RESERVE!5.9 CUMMINS HIGH OUTPUT TURBO DIESELPIONEER STEREO W/ BLUETOOTH, SIRIUS, ETC.
3.73 ANTI-SPIN DIFFSFACTORY ALLOY WHEELSFRESH 285-SERIES TIRES
KEYLESS ENTRYPOWER WINDOWS/LOCKS/MIRRORS/SEATSTOW PACKAGEFOG LIGHTSNERF BARSBEDLINER
CLICK HERE TO VIEW THE FACTORY OPTION LISTCALL 601-376-9869 FOR MORE INFO OR PRICING

WATCH THE VIDEO IN 720 HIGH DEF! WATCH TO THE END FOR THE TEST DRIVE!

https://www.youtube.com/watch?v=jd0OmVsUzK8

What can we say about this truck that you probably don't already know? This 2004 Ram 2500 SLT is the big dog of the diesel world. It's got the HIGH OUTPUT version of the Cummins turbo diesel plus it has 3.73 limited slip diffs so you know it can get it done off road just as well as it does on the road. This ONE OWNER truck was just traded-in at a local dealership on a new one.

This is no stripped down work truck either. It has a fresh set of matching tires, power windows/locks/mirrors, power seat, and more! We installed a new Skyjacker dual steering stabilizer kit as well as a 2" leveling kit to give it the right stance.

This truck is really the "just right" kind of truck you want to find. It's not super low mileage with a sky-high asking price but it's not ragged out and beat to death either. It is still running the stock exhaust, stock air intake, etc. and has not been modded or souped up by some kid that didn't know what he was doing. It's hard to find one of these trucks that is all original like ours. There are no warning lights lit. EVERYTHING WORKS.

With only 210k miles on the clock, it's barely broken-in! It starts right up hot or cold and runs great the whole time. Doesn't use any coolant or smoke either. It's clearly spent most of its time on the highway. The body is straight and the interior shows almost no wear. Even the dashboard is uncracked!

We wouldn't hesitate to get in this truck and drive it ANYWHERE. Our mechanic has gone over everything to make sure it works properly. Feel free to fly in and drive it home to where ever home may be. We'll be glad to pick you up at the airport at no extra charge or we'll find you a shipper to have it transported. Best of all, we got a great buy on it that we're passing along to you in the form of a LOW RESERVE so it should to sell even if the final bid is THOUSANDS BELOW the book value (which runs low on these trucks compared to their actual value) of over $20,000!!!

Values Rough
Trade-In Average
Trade-In Clean
Trade-In Clean
Retail Base Price $8,375 $9,725 $10,825 $13,850 Mileage (210,000) -$625 -$625 -$625 -$625 Total Base Price $7,750 $9,100 $10,200 $13,225 Options: Aluminum/Alloy Wheels $150 $150 $150 $175 Nerf Bars $100 $100 $100 $125 Towing/Camper Pkg $125 $125 $125 $150 5.9L HO Turbo Diesel Engine $6,350 $6,350 $6,350 $7,075 Price with Options $14,475 $15,825 $16,925 $20,750

First Drive : 2004.5 Dodge Ram HD By: © PickupTruck.com, 2004
Posted: 01-27-04 23:10

The performance numbers for the reengineered 5.9-liter “600” Cummins diesel engine in the 2004 1/2 Dodge Ram 2500/3500 are not only awesome, they’re the best of any heavy-duty pickup:

600 lb-ft of torque at 1600 rpm 440 lb-ft at 1000 rpm; at least 555 lb-ft from 1400 to 2900 rpm 325 horsepower at 2900 rpm

Want another number just as incredible?

Oxides of nitrogen (NOx) levels: 2.5 grams per horsepower per hour (g/bhp-hr);

Engine builderscan easily boost horsepower. The aftermarket does it with bolt-on kits.Crank up the turbo, pump up the fuel line pressure, smooth out the intakeairflow, reduce the backpressure, and then slap the motor on a dyno andsmile. But increase power and reduce harmful emissions at the same time…wellthat takes some serious numbers crunching. Cummins and Dodge engineersnot only gave the Ram engine 45 more lb-ft of torque and 20 more poniesover the 2003 High Output (HO) version, they lowered NOx levels by 40percent.

The 2004 diesel standards are just the first step. Cummins and all other dieselmanufacturers are required to do it all over again for 2007 when federalemissions laws get even tougher. Particulates—which remained unchangedfor the 2004 regulations—must be slashed 90% to 0.1 g/bhp-hr. Thenew NOx limit will be 0.2 g/bhp-hr, although manufacturers will have until2010 for their entire fleets to comply. Between 2007 and 2009, they’llbe able to certify their engines at 1.1 g/bhp-hr, but after 2010, dieselengines will be nearly as clean as gas engines.

The good news is that stunning advancements in diesel technology have made it easierto design cleaner, quieter and more fuel-efficient engines in heavy-dutytrucks. If the current trend continues, owners won’t have to giveup torque, towing capacity or payload when the next round of regulationsgo into effect.

“We had no intention from the beginning of sacrificing horsepower or torqueto meet emissions standards,” says Paul McAvoy, senior technicaladvisor at Cummins, when reminded of how severely horsepower levels werereduced in the ‘70s when emissions regulations and fuel economystandards were first imposed.

Under the hood of the Ram 2500/3500 pickups, the new Cummins 5.9L “600”engine is a gem of consistency. Dodge recently assembled a variety ofcab configurations and GVW ratings for the press to drive in the mountainsoutside of Santa Barbara, California. From the surprising and spiritedacceleration of a 4-speed-automatic 2500 2WD regular cab to the dominatingtowing ability of a 3500 crew cab with a 6-speed manual, the Cummins neverdisappointed. To those experienced in driving the previous generationDodge Ram heavy-duty, the improvements were quite noticeable in overallpower, suspension stability and interior comfort. To those with seat timein the new 2500/3500 trucks but with the previous Cummins engine, differencesin noise reduction and throttle response were most apparent.

Dodge alsobrought along comparable diesel models from Chevy and Ford for side-by-sidetests in hauling 5500 pounds of payload and towing a 13,500-pound trailer.Drivers could quickly switch between vehicles and cover a short mountaincourse to compare pulling power, ride & handling, interior ergonomicsand even such esoteric features as visibility with tow mirrors. With aggressivebut manageable low-end torque, the Dodge matched its best-in-class claimsagainst all the competitors. A radar speed gun was positioned below thesummit of San Marcos Pass so drivers could record top speed in each vehicle,and the Ram never lost. Dodge engineers invited the press to try othertests while towing, such as side-stepping clutch at idle while parkeduphill. The Ford and Chevy often coughed and died but the Dodge recoveredwith enough torque to pull up the hill under zero throttle. The new Cummins “600” engine simplifies life for the heavy-duty lineup and gives Dodge a strong foundation for an important segment in its overall truck strategy. The venerable V-10 has been dropped from theRam 2500/3500, although you can get it in the 1500 as part of the wicked 500-horsepower SRT-10 package. The base engine in the 2500/3500 is the 345-horsepower Hemi, but 73 percent of all Ram heavy-duty customers spendthe extra $5,760 to get the diesel option. Dodge used to offer a standardand High Output (HO) diesel engine, and the HO engine was not available in California. Now the Cummins “600” is the only diesel in the Dodge lineup and it’s certified for all 50 states.

“California was always under-represented for us,” says Frank Kelgon, vice presidentof the Dodge truck product team. “Our market share and volume wentup but California was stagnant because of the diesel limitations. There’snow a tremendous opportunity for us in California with the “600”diesel.”

Cummins’ development of the new Ram “600” diesel is a showcase of technologythat will be found on all future diesel engines as emissions standardstighten. A Bosch common rail fuel system capable of handling upwards of23,000psi (around 4000-5000psi at idle) is the hardware, but a very sophisticatedengine management computer makes the fuel-delivery decisions.

With electronically controlled fuel injectors and such high pressure in the fuel lines, aninjection strategy can be developed to deliver optimum power and a morecomplete combustion to reduce emissions. Instead of pushing one largespray of fuel into the cylinder on the compression stroke, engineers canprogram the computer to send small “pilot” injections beforeand after the main injection. By varying the timing and volume of thepilot injections as well as the main injection, engineers can fine-tunethe engine for various loads and rpm.

To achieve this precise level of engine management, the computer code went from 350,000 bytes of information to over 550,000 bytes. Cummins also used an advanced computer program to test fuel maps and other engine-management strategies.

"This design is based totally off our ability to model an engine on the computer,” says McAvoy. “We can look inside the cylinder and combustion process and achieve a simpler approach to cutting emissions.”

The reduction in harmful emissions was achieved without adding exhaustgas recirculation (EGR) or after-treatment equipment. In fact, the “600”engine has only 43 new parts. But when 2007 rolls around, expect the nextCummins engine to have cooled EGR as well as particulate aftertreatmentfilters or traps.

In developing the new “600,” Cummins and Dodge made numerous other improvements or changes to the engine:

• Air inlet redesigned to block hot engine air from entering, reducing the intake charge by 30 to 40 degrees.
• Intake resonator re-engineered for increased airflow
• Larger compressor on Holset turbocharger
• Engine cooling improved with new fan assembly and mounting fan shroud to engine for more efficient airflow through radiator
• Upgraded intercooler
• Upgraded exhaust valves
• Tailpipe increased to 4-inch diameter
• Improved sealing and gasket materials
• Oil-change intervals are now 15,000 miles (vs. 7,500 for competition).
• Holset turbocharger gets bigger compression side
• Switch to electronic control of wastegate
• Upgrades to exhaust manifold
• Revised intake ports in cylinder head
• New piston bowl geometry
• Different spray pattern from injectors

The new Cummins “600” now gives Dodge the current numbersedge over the competition from Ford and Chevy/GMC. Just days after Dodgereleased its numbers in December 2003, Chevy announced the 6.6-liter Duramaxwould be boosted to 310 horsepower and peak torque of 590 lb ft. GM, workingwith Isuzu, added a new turbo charger, reworked the engine computer andinstalled an electronically controlled EGR. Ford did not announce anychanges its 6.0-liter Powerstroke, leaving it at 325 horsepower and 560lb ft.

Diesels and heavy-duty pickups are important to the manufacturers, especially at a time when Nissan, Honda and Toyota are poised to steal market share in the light-duty truck market. Heavy-duty trucks hardly ever need cash incentives and often sell for sticker price, and 2500/3500 accounts for a third of overall Ram sales. Customers are usually very loyal to theirfavorite brand, and many light-truck consumers look up to heavy-duty owners for advice and direction when shopping for a pickup. Dodge now has over 28% of the heavy-duty diesel market, recently passing GM and setting itssights on Ford’s dominating share. Considering that Ford sold nearly twice as many F-series pickups last year as Dodge Rams (845,586 unitsvs. 449,371, according to Automotive News), Dodge’s presence inthe heavy-duty market is quite remarkable and continuing to improve. Nowthat Dodge can boast best-in-class numbers, that share is expected toincrease.