1930 Ford Model A Tudor Deluxe

1930 Ford Model A Description

Restoration work (spent over $13,493 for restoration) recently performed, in details, are:

1- Installed new Mitchell overdrive

2- Changed front and rear differential oil in February 2016

3- Changed transmission oil in February 2016

4- Replaced new battery with anti corrosion in 2013

5- Replaced bushings on the rear wheel plates

6- Welded up worn tracks and machined them to correct size

7- Replaced both brake cam shaft

8- Installed new springs on shoes and centered the shoes on backing plates

9- Reinstalled newly bushed emergency brake carrier on rear braking plates

10- Adjust all brake rods and freed up frozen clevis

11- Cleaned and repacked bearings and instal new seals in rear hub

12- Cleaned and repacked left front bearings

13- Installed new races in right front drum

14- Adjust shoe to the drum clearance and adjust brake rod length for proper operation

15- Check and adjust clutch pedal operation

16- Remove and rewiring both tail light

17- Installed missing lens and new tag bracket on right tail light

18- Installed new ignition switch and cable

19- Machined and groove missing from the reproduction dash

20- Installed new leak proof end plate after removing steering box

21- Installed new harness with turn signals incorporated

22- Installed new halogen head lamps

23- Replaced right rear window crank

24- Adjusted the interior panels to correct shape

25- Replaced a new cap for gas cap

26- Car just serviced: Drained the gas, transmission, rear and engine sump and replaced with new fluids

27- Replaced a new horn

28- Adjusted spark plug gap; adjusted point gap and reset timing