1967 Ford Mustang Base Fastback 2-Door 4.7L

1967 Ford Mustang Base Fastback 2-Door Description

1967 Ford Mustang, Pro-Touring, Resto-Mod

You are looking at a beautiful, restoration on this 1967 Mustang with clear California Title.

This Mustang started its life with a 6 Cylinder engine and it was extremely solid with minimum surface rust before it was torn apart completely for Paint & suspension Installation.

Under the Hood is a fire breathing 98 4 Valve, all Aluminum, SVT Cobra Engine with 5 a Speed T45 Transmission. All the Smog parts were removed and the ECU was reprogrammed by Ron Francis Wiring.

Further, the car was designed with the perfect balance of original and new. The car keeps its original Mustang character with tons of upgrades that create a gorgeous true head turner, one of a kind Mustang! The car is not finished, but all the major work and expense has being done. These cars do not come up for sale often, at least not under 35K$.

The 4.6 Cobra all Aluminum Teksid Engine comes with upgrades such as:

·MSD High Performance Coil Packs

·BBK Under Drive Pullies

·Ford Racing Shorty Headers

·BBK Mass Air Intake

Suspension:

·Heidts Mustang II in the front, and Heidts 4 Link, Coil Over on the back

Brake System:

·2004 Mustang Front Cobra Brakes, with 13 Inch Slotted Rotors and a Mustang Steve Bracket Kit and new Braided Hoses and Pads

·Brake system still needs to be bled

·The rear end is a Posi 3.75 gear out of a 94 Mustang GT with Brand New slotted Rotors, Braided Hoses, Calipers, Pads, etc.

·Mustang Steve Brake & Clutch Pedal Assembly with, clutch cable, late model Master Cylinder, Brand New Booster and Proportioning Valve

·All new brake lines throughout

Paint

·Beautiful Stealth Gray Metallic, (code: WA928L) that will need to be buffed, there are a few minor scratches from moving the car around the shop

Electrical

·Brand new Year specific American Auto Wire Complete Harness

·Ron Francis Telorvek Harness to run the Engine, with OBD II Connector under dash and Inertia Switch in the trunk.

·Dakota Digital Dash

·All new lights inside and out, Including Sequential tail Lights

·Yellow Top Optima Battery

Fuel System

·Tanks Inc. Fuel Injection Tank with a Walbro G Series In-Tank Fuel Pump -For Engines Up To 650 HP

·AN Fittings throughout, with braided pressure hose and high performance fuel filter.

Interior

·Custom Two Tone Seats (driver is powered), with matching door panels. Mounting brackets will need to be fabricated to install the front seats. The Upholstery work is top quality, 0ne of a kind

·Aluminum Dash Trim

·One piece ABS Headliner, which unfortunately cracked when the car was being transported, you can barely tell, but it is cracked.

·Dina-Pad Firewall pad

·Sound Deadening inside entire cabin and Trunk area

·NO Carpet, Sill plates, Dash Pad or Package Tray

·Flaming River Stainless Steel Steering Column, which it’s not hooked up yet, I normally wait until the seats are installed so that the shaft can bet cut to size.

Wheels

·American Racing Shelby Cobra VN427 Wheels, 2 are installed with new Nitto Tires and 2 are still in boxes, (no tires for the 2 in boxes). They come with brand new lug-nuts valve stems and locks

Miscellaneous

·Fiberglass Shelby Hood

·Aluminum Hood Hinges

·Billet Aluminum Cobra Gas Cap

·Aluminum Radiator with electric fan

·Braded Power Steering Hoses, brand new Flaming River Power Steering Rack and Pinion

·NO Exhaust System Yet

·3 point Retractable Seat Belts, ( seat belts are installed but not tightened as they will need to be removed when interior gets installed, no rear seatbelts, only front)

·The front and rear quarter windows show some minor pitting as they are original to the car, but it’s not that bad, same thing with door handles.

Parts needed that will need to be purchased:

·Front Bumper

·Suns Visors and Rear View Mirror

·Dash Pad, Wiper Arms and Antenna

·Mirrors

·Wind lace

·Package Tray

·Carpet

·Front Grill and Grill Trim

·Front and rear glass with trim

·Exhaust system

·Carpet

·2 Tires

Parts that come with the car and will need to be installed:

·All seats and Door Panels

·Kick Panels with Speaker Cut-outs

·Steering Column and Shaft

·Gas Pedal and Accelerator Cable

·Clutch cable needs to be tightened

·Front and Rear glass Seals

·3 Cobra Emblems (1 for the front grill and 2 for the Fenders)

·Door Locks

·Original Parking Brake Handle

·Dash Aluminum Trim

Hundreds of hours and thousands of dollars spent on this car to make this vehicle a true Pro-Touring Vehicle. The car is for sale locally and I deserve the right to end the auction if a BEST OFFER comes along.

AS IS - NO WARRANTY

This vehicle is being sold as is, where is with no warranty, expressed written or implied.No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.

Your bid is a contract.By placing a bid, you are agreeing to these terms of sale. If you do not agree with these terms, please do not bid.

Payment:Due in FULL within 3 Business days of auction end unless prior arrangements are made. A $500.00 non refundable deposit will be required within 24hrs of auction’s end No IFs or BUT's.

Shipping:We will assist with loading and all shipping charges will be the buyer’s expense.

Feel free to contact me. Thanks for looking.

On Nov-19-16 at 06:15:07 PST, seller added the following information:

THIS IS NOT A FASTBACK, THE FASTBACK PORTION WAS FILLED OUT AUTOMATICALLY BY EBAY AND I CAN NOT EDIT, BUT THIS IS NOT A FASTBACK