2002 GMC Sierra Race Truck

2002 GMC Sierra 1500 Description

If you are looking for a super clean truck to cruise in or go to the track, this is the truck for you! This complete build doesn't have but 8,980 miles on it! Southern truck with no rust, the exterior of this truck features updated headlights, a folding bed cover, bed liner, billet grille, cowl induction hood, and a painted to match rear roll pan. Now for the good stuff!

Motor

6.0L bored .030" over and stroked to 4.0". Lunati rotating assembly, Sledge Hammer crank, Pro Billet light weightrods, Wiesco Pistons, King Bearings and ARP bolts throughout the entire motor. Lunati Camshaft at .050" 232/238 lift .599/.601" on 113 LSA, Comp Cam 7.250" Push Rods, L92 Cylinder heads milled .030" to end up at 11:1 compression, Morel Hi-Rev lifters, Manley SS exhaust valves, GM LS3 Hollow stem intake valves, Lunati/PAC dual valve springs with .650" max lift, Lunati Titanium Retainers, and a BTE Flywheel. Motor made 600HP AND 575FTLBS AT THE FLYWHEEL!

Trans

4L65E with HD Output shaft, Billet overrun piston, Smart Shell input drum with bearing kit, GM 5 pinion input carrier, GM 5 pinion reaction carrier, ALTO 2-4 band Kevlar lined, Raybestos 3-2 clutch pack, Borg Warner double caged 29 element sprag, Corvette servo, .490" boost valve, updated aluminum accumulator pistons, updated manual valve body, B&M Cast Deep Pan kit, 4200 stall Pro Series stage 2 billet torque converter with lock up overdrive clutch from Circle D Torque Converters.

LS3 pulley and belt system

Bosch 044 Fuel Pump, LS9 Injectors, Aeromotive Regulator

LS3 Intake with Holley 90mm throttle body

GM 9.5" 14 BOLT with Detroit Tru Trac Locker and TD rear end cover

Custom built driveshaft from Truck Parts Specialists with Spicer U-Joints

CalTrac suspension bars, Rancho adjustable shocks, QA1 90/10 Drag shocks on the front

Custome made Bogart D10 Pro Billet wheels

Mickey Thompson ET Street S/S 30x12.50X15on the back

Sportsman S/T P275/60R15 on the front

Hooker Long Tube headers 1.75", 3" exhaust with Flowmaster 10 series mufflers, and DMH Electric cut outs

2 Electric fans

Roll cage made and installed by JAWS Racing with 5 point RJS Seatbelts

Custom audio system with amp and subwoofer

Thisentire truck was professionally put together and all tuning was done with HP Tuners! If any more info is needed please feel free to give us a call! This truck is for sale locally and we have the right to end the auction at any time. Thanks! Jonathan (901)619-1366 Doug (662)404-1033