1948 IH Harvester 12 foot van KB5 Cornbinder Montana Barn Estate find - BiDnBuY

Condition: Used
Make: International Harvester
Model: KB 5
Type: Van Camper
Trim: Sliding doors - RumRunner - Expedition project
Year: 1948
Mileage: 100,000
VIN: 119196
Color: Green and Brown
Engine size: BG241 6 cylinder
Number of cylinders: 6
Fuel: Gasoline
Transmission: Manual
Drive type: RWD
Vehicle Title: Rebuilt, Rebuildable & Reconstructed
Interested? Contact seller!

1948 International Harvester KB 5 Description

Green IH Montana Barn Find 12 foot box - Survivor – BiDnBuY

1948 International Harvester K B 5 dual rear wheel, at some point the engine was replaced with a more modern BG241 Int'l I-6 with manual trans. I have 2 bumpers, 2 valence trays, iron grill guard headlight buckets, hood emblems, embellishmentsand extra stainless grille parts. I'm sure that you will want to repair and/or replate some or all of the trim pieces. There is a white gasoil heater behind the stand up driver's seat partition, a swing davit just inside the passenger side rear door, diamond plate steel floor, very little rust on the bottom of the front fenders. Bent pipe racks and rails have been added to the interior for the last owners service station supply business... these can be easily removed. A great candidate for a restoration or resto-mod or even hot rod. Last titled and licensed in Western Montana in 1970's. No title but will assist with getting one and I've got a new data plate that is included. I bought from an estate with notarized bill of sale and can provide you with same. I can assist you to arrange open trailer transport to your location. Your bid acknowledges the above facts.

You may call to get specific questions answered, propose tradesor to request additional pictures. No reserve and all reasonable Best Offers will be considered and responded to in a timely manner. Good luck and thanks for your interest.

Ken 208 699 0740

From Wikipedia

For the KB-1 thru KB-5, chrome "wings" were added on the sides of the grill, a wrap-around chrome piece on the front hood, a hood ornament and chrome lettering indicating the model designation below the International nameplate on each side of the hood. For the KB-6 and larger trucks, the only external changes were that the Triple Diamond badge was moved to the top of the grille chrome-work, and the model designations were added to the hood-side chrome trim.

From Wisconsin History dot com

SPECIFICATIONS

INTERNATIONALMODEL

KB-5

Gross Vehicle Weight Rating 13,500 to 17,500 lb.

(Gross vehicle weight rating depends upon the type of terrain,

road speeds, method of loading, nature of loads, gear shifting,

etc.This is controlled by the International Harvester point

system of rating motor trucks.)

Chassis Dimensions:(in inches)Weights:(in pounds)

Wheelbase (WB)135147159177195

Overall length, with front

bumper (OAL)21% 235% 247% 265% 307^

Back of cab to c/1 of rear

axle(CA)607284102120

C/1 of rear axle to end of

frame (AF}4456565680}/8

Back of cab to end of frame

(CF)104128140158200^

Bumper to center of front

axle(BA)32%32%32%32%32%

Turning radius with bumper clearance (feet)....2426283134

Chassis weight, including

fuel, oil, and water (approximate)3,7053,7703,8153,8653,940

The following dimensions (with 7.50-20 tires) are the same

for all wheelbases:

Tread- —front wheels, 58^2 in-; rear wheels, 66}-^ in.

Clearance under front axle, 12^ in.; under rear axle, 9% in.

Overall width- —front, 74 in.; rear, 85^ in.

Height from top of frame to ground, loaded—-front, 27% in.;

rear, 29 % in.

Frame:Pressed steel channel.135-in.w.b.,8 x % x 3 in.;

147-in. and 159-in. w.b., 8^x%x3^ in.; 177-in. and 195-in.

w.b., 8% x 14i x 3^ in.

Engine,GreenDiamond233:Six-cylinder,cast-in-block,

L-headtype;3->f6-in.bore,4J^-in.stroke.Displacement,

233 cu. in.; compression ratio, 6.3.A.M.A. rating, 26.3 h.p.;

maximum brake h.p., 93 at 3,400 r.p.m.Maximum torque,

181lb.-ft.at1,000r.p.m.Foursteel-backed,replaceable-

shell,precision-typemainbearings;totalprojectedarea,

16.24 sq. in.Six replaceable-shell, precision-type connecting-

rod bearings.Exhaust-valve seat inserts.

Lubrication: Full-pressure feed to all main, connecting-rod

and piston-pin bearings, camshaft and timing chain. Gear-

type, gear-driven oil pump.Oil capacity, 53^ qt.

CoolingSystem:Centrifugalpumpcirculation,fin-and-tube

radiator.Pump driven by V-type fan belt.Capacity, 14 qt.

Ignition:6-volt, vacuum control, full-automatic distributor.

Generator:30-ampere, 200-watt, shunt-wound, belt-driven.

Lights:Sealed-beam headlights.

Battery:6-volt, 15-plate.

Starting Motor:6-volt.

Carburetor:Downdraft type. Oil-bath-type air cleaner.

Fuel System: Fuel pump. 18-gal. tank inside frame. Gasoline

filter.

Clutch:10-in., single-plate, with vibration damper.

Transmission: 4 speeds forward, 1 reverse; sliding-gear,

selective-type, mounted in unit with engine.

Transmission Reductions: First, 6.4 to 1; second, 3.09 to 1;

third, 1.69 to 1; fourth, 1 to 1; reverse, 7.82 to 1.

Propeller Shaft: Large-diameter heavy steel tubing. 2-piece

shafts with self-aligning center bearing.

Universal Joints:All-metal, roller-bearing, anti-friction type.

Front Axle: Drop-center, I-beam, heat-treated steel drop-

forging. Fore and aft steering hook-up, tie rod at rear for

protection.

Rear Axle: Full-floating, spiral-bevel gear type. Hotchkiss-type

final drive. Chrome-molybdenum steel axle shafts. Heat-

treated, one-piece, tubular banjo-type steel housing. Differential

and wheel bearings are tapered rollers. Pinion, straddle-

mounted on roller bearings.

Axle Reductions:5.28 to 1; 6.166 to 1; 6.66 to 1; 7.16 to 1.

Axle Reductions (Two Speed): 5.14 to 1—7.15 to 1; 5.83 to 1—

8.11 to 1; 6.33 to 1—8.81 to 1.

Steering Gear:Cam-and-twin-lever type.

Brakes: Service: 4-wheel, hydraulic, internal-expanding, two-

shoe, double-anchor type. Hand: Propeller-shaft type, mounted

back of transmission.

Springs: Semi-elliptic. Front, 2 x 42 in.; rear, 1Yi x 46 in.;

auxiliary, 2l/i x 30 in.

Wheels:Malleable iron, spoke type.

Tires:6.50-20 front and dual rear.

Controls: Throttle, light, and choke controls on instrument

panel. Accelerator, clutch, and service brakes operated by

pedals. Control levers located in center of driving compartment.

Standard Equipment: Flat-back cowl and dash; underslung tire

carrier; spare rim; sealed-beam headlights; combination tail

and stop lights; air cleaner; auxiliary rear springs; jack and tools.

Special Equipment: The following will be available at extra

cost when specified on order: Cab; extra windshield wiper;

optional tires, single front and dual rear; hydrovac booster

brake; 300-watt generator; two-speed axle with power shift;

auxiliary fuel tanks; oil filter; governor; increased cooling;

increased capacity brakes and propeller shaft guard and

emergency brake shield for school bus chassis.

Finish: Frame and wheels, black. Grille, hood, cab, and

fenders, optional colors—No. 10 dark green, No. 50 red, No. 22

maroon or No. 60 black.

Specifications subject to change without notice.

Title	KB-5
Object Type	International Truck Specifications
Language	English
Source	International Truck Specifications -- KB Line -- 1947-1949
Page Number	1
Electronic Publisher	Wisconsin Historical Society
Physical Description	8.5 x 11 inches
Electronic Publication Date	2011
Year	1948
Date	1947-1949
Rights	Copyright 2011 by the Wisconsin Historical Society (Madison, Wisconsin)
Full Text	SPECIFICATIONS INTERNATIONAL MODEL KB-5 Gross Vehicle Weight Rating 13,500 to 17,500 lb. (Gross vehicle weight rating depends upon the type of terrain, road speeds, method of loading, nature of loads, gear shifting, etc. This is controlled by the International Harvester point system of rating motor trucks.) Chassis Dimensions: (in inches) Weights: (in pounds) Wheelbase (WB) 135 147 159 177 195 Overall length, with front bumper (OAL) 21% 235% 247% 265% 307^ Back of cab to c/1 of rear axle(CA) 60 72 84 102 120 C/1 of rear axle to end of frame (AF} 44 56 56 56 80}/8 Back of cab to end of frame (CF) 104 128 140 158 200^ Bumper to center of front axle(BA) 32% 32% 32% 32% 32% Turning radius with bumper clearance (feet).... 24 26 28 31 34 Chassis weight, including fuel, oil, and water (approximate) 3,705 3,770 3,815 3,865 3,940 The following dimensions (with 7.50-20 tires) are the same for all wheelbases: Tread- —front wheels, 58^2 in-; rear wheels, 66}-^ in. Clearance under front axle, 12^ in.; under rear axle, 9% in. Overall width- —front, 74 in.; rear, 85^ in. Height from top of frame to ground, loaded—-front, 27% in.; rear, 29 % in. Frame: Pressed steel channel. 135-in. w.b., 8 x % x 3 in.; 147-in. and 159-in. w.b., 8^x%x3^ in.; 177-in. and 195-in. w.b., 8% x 14i x 3^ in. Engine, Green Diamond 233: Six-cylinder, cast-in-block, L-head type; 3->f6-in. bore, 4J^-in. stroke. Displacement, 233 cu. in.; compression ratio, 6.3. A.M.A. rating, 26.3 h.p.; maximum brake h.p., 93 at 3,400 r.p.m. Maximum torque, 181 lb.-ft. at 1,000 r.p.m. Four steel-backed, replaceable- shell, precision-type main bearings; total projected area, 16.24 sq. in. Six replaceable-shell, precision-type connecting- rod bearings. Exhaust-valve seat inserts. Lubrication: Full-pressure feed to all main, connecting-rod and piston-pin bearings, camshaft and timing chain. Gear- type, gear-driven oil pump. Oil capacity, 53^ qt. Cooling System: Centrifugal pump circulation, fin-and-tube radiator. Pump driven by V-type fan belt. Capacity, 14 qt. Ignition: 6-volt, vacuum control, full-automatic distributor. Generator: 30-ampere, 200-watt, shunt-wound, belt-driven. Lights: Sealed-beam headlights. Battery: 6-volt, 15-plate. Starting Motor: 6-volt. Carburetor: Downdraft type. Oil-bath-type air cleaner. Fuel System: Fuel pump. 18-gal. tank inside frame. Gasoline filter. Clutch: 10-in., single-plate, with vibration damper. Transmission: 4 speeds forward, 1 reverse; sliding-gear, selective-type, mounted in unit with engine. Transmission Reductions: First, 6.4 to 1; second, 3.09 to 1; third, 1.69 to 1; fourth, 1 to 1; reverse, 7.82 to 1. Propeller Shaft: Large-diameter heavy steel tubing. 2-piece shafts with self-aligning center bearing. Universal Joints: All-metal, roller-bearing, anti-friction type. Front Axle: Drop-center, I-beam, heat-treated steel drop- forging. Fore and aft steering hook-up, tie rod at rear for protection. Rear Axle: Full-floating, spiral-bevel gear type. Hotchkiss-type final drive. Chrome-molybdenum steel axle shafts. Heat- treated, one-piece, tubular banjo-type steel housing. Differential and wheel bearings are tapered rollers. Pinion, straddle- mounted on roller bearings. Axle Reductions: 5.28 to 1; 6.166 to 1; 6.66 to 1; 7.16 to 1. Axle Reductions (Two Speed): 5.14 to 1—7.15 to 1; 5.83 to 1— 8.11 to 1; 6.33 to 1—8.81 to 1. Steering Gear: Cam-and-twin-lever type. Brakes: Service: 4-wheel, hydraulic, internal-expanding, two- shoe, double-anchor type. Hand: Propeller-shaft type, mounted back of transmission. Springs: Semi-elliptic. Front, 2 x 42 in.; rear, 1Yi x 46 in.; auxiliary, 2l/i x 30 in. Wheels: Malleable iron, spoke type. Tires: 6.50-20 front and dual rear. Controls: Throttle, light, and choke controls on instrument panel. Accelerator, clutch, and service brakes operated by pedals. Control levers located in center of driving compartment. Standard Equipment: Flat-back cowl and dash; underslung tire carrier; spare rim; sealed-beam headlights; combination tail and stop lights; air cleaner; auxiliary rear springs; jack and tools. Special Equipment: The following will be available at extra cost when specified on order: Cab; extra windshield wiper; optional tires, single front and dual rear; hydrovac booster brake; 300-watt generator; two-speed axle with power shift; auxiliary fuel tanks; oil filter; governor; increased cooling; increased capacity brakes and propeller shaft guard and emergency brake shield for school bus chassis. Finish: Frame and wheels, black. Grille, hood, cab, and fenders, optional colors—No. 10 dark green, No. 50 red, No. 22 maroon or No. 60 black. Specifications subject to change without notice.