1 | 2 | 148-01B | TAIL LAMP ASSEMBLY - Fits 1969-9/73 FJ40 - Trim ring diameter is 5 1/4 inches - Comes with 148-07B Cover - Does NOT come with #148-40B Nuts, #148-25C & #148-26C tail light brackets, order separately if needed Non Club price without the 15% Discount is $ 43.00 | 36.55 | 73.10 |
2 | 8 | 148-40B | NUT- Fits 1969-9/73 FJ40 Non Club price without the 15% Discount is $ 0.71 | 0.60 | 4.80 |
3 | 1 | 081-01A-KIT | FRONT WHEEL CYLINDER SET -**Special Order NO Return Fits 1961-7/70 FJ40/FJ45 Front. Set includes qty 2 right front wheel cylinders & qty 2 left front wheel cylinders. Set does both sides of your front axle. On Sale - Everyone gets the Discounted Price on this part. Special Order NO Return | 195.00 | 195.00 |
4 | 1 | 081-02A-KIT | REAR WHEEL CYLINDER SET - Fits 1963-7/70 FJ40 Rear. Set includes qty 4 rear wheel cylinders. Set does both sides of your rear axle. On Sale - Everyone gets the Discounted Price on this part. | 160.00 | 160.00 |
5 | 2 | 081-16-KIT | BRAKE SPRING KIT - Fits 1963-7/80 40, 45 & 55 Series with 2 1/2 inch wide shoes - Comes with #081-16 brake spring (qty 4), #081-17 retainer pin (qty 4), #081-18 retainer clip (qty 4), #081-19 backing plate plug (qty 4), & #081-20 adjuster plug (qty 4) - Does both drums on one axle - For 8/80-1/90 vehicles, see #081-105 Rear Brake Hardware Kit Non Club price without the 15% Discount is $ 70.15 | 59.63 | 119.26 |
6 | 1 | 081-15A-A | AFTERMARKET FRONT BRAKE SHOES - Fits 1961-9/75 (4 shoes = 1 axle) Non Club price without the 15% Discount is $ 55.00 | 46.75 | 46.75 |
7 | 1 | 081-15A-A- | AFTERMARKET REAR BRAKE SHOES - Fits 1961-7/80 (4 shoes = 1 axle) Non Club price without the 15% Discount is $ 55.00 | 46.75 | 46.75 |
8 | 1 | 044-01B-SOR | SOR GRAPHITE MANIFOLD GASKET - Fits 1968-1974 F Engines. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. | 29.00 | 29.00 |
9 | 1 | 120-07AS-KIT | STAINLESS STEEL WINDSHIELD HINGE SCREW AND WASHER KIT - 1958-9/78 FJ40/FJ45 - Set of 16 - Stainless steel - does both hinges. Non Club price without the 15% Discount is $ 28.87 | 24.54 | 24.54 |
10 | 8 | 305-99C | BOLT SEATBELT- Fits FJ40/FJ45/FJ55/FJ60/FJ62 Non Club price without the 15% Discount is $ 1.80 | 1.53 | 12.24 |
11 | 2 | 306-20 | 2 INCH CROW HEAVY DUTY LAP BELT- Black-Adjustable from 22 inches to 62 inches-Fits all models-Made of long lasting Military spec black nylon webbing-Has slip type roller slides, & forged alloy steel quick release latch and link buckle system-Installation hardware NOT included (see #305-99)-Sold each On Sale - Everyone gets the Discounted Price on this part. | 48.00 | 96.00 |
12 | 1 | 043-12 | 38MM WEBER TYPE CARBURETOR KIT- Fits 1968-9/73 FJ40, FJ45 & FJ55 with stock or modified F & 2F engines-Vehicles from 2/73-9/73 will have to plug the fuel return line-Comes with new 38 non progressive Weber Carb, adapters, gaskets, hardware, & air cleaner-Not smog legal, please check your local smog laws before purchase-Not designed to be operated with any other smog devices-Vehicles from 9/69-9/73 requires #042-04H accelerator cable, order separately On Sale - Everyone gets the Discounted Price on this part. | 360.00 | 360.00 |
13 | 1 | 042-04H | ACCELERATOR CABLE - Fits 7/70-8/80 with Holley, Rochester, and Weber Carburetor - Also custom V8 applications (SOR is NOT responsible for correct V8 length) - Housing length is 21 inches - Cable length is 29 inches - End of cable is NOT threaded On Sale - Everyone gets the Discounted Price on this part. | 29.00 | 29.00 |